Login

Register

Login

Register

100Ltr Tank – Instant Water Heater (SHD-100)

In stock

SHD-100 100Ltr Instantaneous Storage Water Heater.

(Imported from Germany)

The SHD-100 gives you a High Performance alternative to the normal storage water heater.

It is closed (pressurized) wall-mounted Three Phase Electrical Supply Power with step-less temperature selection up to 85°C.

This sophisticated SHD can be operated in two different modes:

  • Full Power 21kW Instant 10L litres per minute Storage Systemor
  • As a dual circuit 21kW with 3.5kW (standby) element.

It incorporates marginal surge protection via pc board voltage fluctuation cut-out and a reset-table via temperature dial or externally installed button.

The SHD can also be used with preheated water up to 75°C.

Main Points:

  • Standby current consumption 0.45 and/or 0.77 KW
  • Stepless adjustable temperature setting 35°C to 85°C
  • 21 KW ~ 400V (Three Phase Power)
  • 10 Litres/min flow-rate for Instant & continuous heating
  • Corrosion Protection Anode
  • Over Heating Electrical Thermal Cut-Out
  • 600kPa Enamelled Steel Tank
  • KV30/600kPa Safety Relief Valve or KV40/Safety Valve with 400kPa Pressure Reducer.

.

Installation:

This unit has to be fitted with the “KV30 combo valve” a “Pressure Relief” valve for relief of hot water expansion.

There is a “KV40 combo valve” which is similar to the KV30 with the addition of a “Pressure Reducing Valve”, for those installations with more than 6 bar pressure.

SKU: GY-1 Category:

SHD-100 100Ltr Instantaneous Storage Water Heater.

(Imported from Germany)

The SHD-100 gives you a High Performance alternative to the normal storage water heater.

It is closed (pressurized) wall-mounted Three Phase Electrical Supply Power with step-less temperature selection up to 85°C.

This sophisticated SHD can be operated in two different modes:

  • Full Power 21kW Instant 10L litres per minute Storage Systemor
  • As a dual circuit 21kW with 3.5kW (standby) element.

It incorporates marginal surge protection via pc board voltage fluctuation cut-out and a reset-table via temperature dial or externally installed button.

The SHD can also be used with preheated water up to 75°C.

Main Points:

  • Standby current consumption 0.45 and/or 0.77 KW
  • Stepless adjustable temperature setting 35°C to 85°C
  • 21 KW ~ 400V (Three Phase Power)
  • 10 Litres/min flow-rate for Instant & continuous heating
  • Corrosion Protection Anode
  • Over Heating Electrical Thermal Cut-Out
  • 600kPa Enamelled Steel Tank
  • KV30/600kPa Safety Relief Valve or KV40/Safety Valve with 400kPa Pressure Reducer.

.

Installation:

This unit has to be fitted with the “KV30 combo valve” a “Pressure Relief” valve for relief of hot water expansion.

There is a “KV40 combo valve” which is similar to the KV30 with the addition of a “Pressure Reducing Valve”, for those installations with more than 6 bar pressure.